MODEL M-100 MIXING DEVICE - SPECIFICATIONS

Maximum processing temperature

600 F (316 C)

Injection tube capacity

16 cm3 /~1.0 cubic inch (about 16 g by weight at 1.0 density)

Volts AC

120 V or 240 V (See marking on device)

Watts

500

Power switch w/ thermal cut-off

10 AMP

Injection nozzle orifice

.125” dia.  (3.175 mm )

Device weight

16 lbs. (7.26 Kg)

Device footprint

6.0”W x 9.0”L  (15.2cm  W x 23cm  L)

Accessories included: Hand Mixing Tool, Helical Mixing Blade*, Blade Alignment Tip*, extra Material Stripping Elements* (2 qty.), Stopper Tool, Sensor Jumper Wire (coiled), Power Input Jumper Cord, Needle Nose Pliers, Instruction Manual.

ECB-001 TEMPERATURE CONTROLLER - SPECIFICATIONS

Power input

120 V or 240 V (see control box label)

Power switch w/ thermal cut-off

10 AMPS

Dimensions (approximate)

3.1”W X 4.1”D X 5.0”H   (79mm  W x 104mm  D x 127mm  H)

Weight  (approximate)

2 lbs. (.91 Kg)

Accessories included: Power input wire, Tilt Bracket, P.I.D. programming guide (from P.I.D. Mfr.), User's Guide

MODEL S-100 INJECTION MOLDER  - SPECIFICATIONS

Maximum processing temperature

600 F (316 C)

Injection tube capacity

16 cm3  /~1.0 cubic inch (about 16 g by weight at 1.0 density)

Volts AC

120 V or 240 V (See marking on machine)

Watts

600

Power switch w/ thermal cut-off

10 AMP

Maximum mold size

2.50”D x 2.63”H x 4.00”W   (64 mm D x 67 mm H x 102 mm W)

Injection nozzle orifice

.125” dia. (3.175 mm )

Sprue center line

1.25” (31.75mm) - distance from backing plate to nozzle orifice center

Machine weight

35 lbs. (15.88 Kg)

Machine footprint

4.00”W x 8.25”L  (10.2cm W x 21cm  L)

Maximum machine dimension

9.0” x 14.0” x 25.0” (with handle up)  - (23cm x 35.5cm x 63.5cm)

Accessories included: Practice Mold, Purge Block, Pour Tube, Wooden Craft Sticks, 1-lb. Resin Pellets (LDPE), Handle Extension, Mold Release Spray (2 oz. bottle), Sprue Cutter Pliers, Needle Nose Pliers, Sensor Jumper Wire (coiled), Power Input Jumper Cord, Instruction Manual.

MODEL B-100 INJECTION MOLDER  - SPECIFICATIONS

Maximum processing temperature

600 F (316 C)

Injection tube capacity

16 cm3  /~1.0 cubic inch (about 16 g by weight at 1.0 density)

Volts AC

120 V or 240 V (See marking on machine)

Watts

400

Power switch w/ thermal cut-off

5 AMP

Maximum mold size

2.50”D x 2.63”H x 4.00”W   (64 mm D x 67 mm H x 102 mm W)

Injection nozzle orifice

.125” dia. (3.175 mm )

Sprue center line

1.25” (31.75mm) - distance from backing plate to nozzle orifice center

Machine weight

35 lbs. (15.88 Kg)

Machine footprint

4.00”W x 8.25”L  (10.2cm W x 21cm  L)

Maximum machine dimension

9.0” x 14.0” x 25.0” (with handle up)  - (23cm x 35.5cm x 63.5cm)

Accessories included: Practice Mold, Purge Block, Pour Tube, Wooden Craft Sticks, 1-lb. Resin Pellets (LDPE), Handle Extension, Mold Release Spray (2 oz. bottle), Sprue Cutter Pliers, Needle Nose Pliers, Sensor Jumper Wire (coiled), Power Input Jumper Cord, Instruction Manual.